Description
Disclaimer
Description
Dental E-generator High Speed Handpiece With LED
Product Description | |
Chuck Type | Push Button |
Water Spray | Three Water Spray |
Rotation Speed | 280,000-350,000 RPM |
Bearing | Ceramic bearing |
Bur Size | Φ1.595-Φ1.600mm |
Working pressure | 0.25 -0.3 Mpa |
Noise Level | ≤ 65 dB |
Hole | 2 Holes / 4 Holes |
Head | Standard Head / Super Torque Head |
Features:
1.High fitness, with B2/M4 interface for your choice, the product is suitable for all brands of dental chairs.
2.Wide cooling range, Triple water spray ,Wide cooling, safer operation.
3.The use of bearings, long life, stable speed, low noise, excellent product quality.
4.High safety factor, the burs holding of the spindle is more than 2KG, and the treatmentprocess is safer without dropping the bur during the operation.
5.Under the normal working condition of 0.25mpa ~ 0.30mpa, the rotational speed is 280,000 ~ 400,000 RPM, neither too low rotational speed is not enough torque, nor too high rotational speed will cause excessive sound and reduce the bearing life.
6.The water pipe and air pipe are separated independently, and the water output is more uniform.
7.Self-Genarator, without external power supply, can also be treated in a lamplight environment.
8.135°C Autoclavable.All stainless steel materials can be sterilized, pressure resistant and fall resistant.
—————————–
Packing List
Handpiece *1
Wrench *1
Operation manual *1
Marchi –
I started using this brand and it was great with immediate results, but then I went to another brand for a while and did not experience the same results as with this particular brand. A lesser cost does not provide the same results, so I’ve returned to this brand and again, the results were seen immediately. Doctor recommended and I tried to cut
Charles –
Whatever it’s doing I can feel the difference. I take many prescriptions including a statin.